SP Aesthetics logo featuring elegant lettering in gold and turquoise, representing a luxury medspa focused on non-invasive cosmetic procedures in Wellington, Florida.

ZenPro CO2 Laser, Wellington, FL

CO2 laser resurfacing device displayed inside SP Aesthetics in Wellington, FL.

Advanced Fractional CO2 Laser Resurfacing for Smoother, Renewed Skin

Ready for a more powerful skin reset?

SP Aesthetics is proud to offer ZenPro CO2 Laser Skin Resurfacing in Wellington, Florida, an advanced fractional laser treatment designed for patients who want to significantly improve the appearance of aging, sun-damaged, scarred, or uneven skin.

Unlike lighter treatments that primarily focus on maintaining your complexion, fractional CO2 laser resurfacing creates controlled micro-injuries in the skin to encourage renewal and collagen remodeling. CO2 laser technology has long been used to improve the appearance of wrinkles, scars, sun damage, and other skin irregularities.

At SP Aesthetics, every treatment begins with a personalized consultation. We evaluate your skin, concerns, lifestyle, desired outcome, and acceptable downtime before recommending the right treatment intensity for you 

Your skin isn’t one-size-fits-all. Your laser treatment shouldn’t be either.

What Is ZenPro CO2 Laser Resurfacing?

ZenPro is an advanced fractional carbon dioxide (CO2) laser system. The technology delivers precisely controlled laser energy to targeted areas of the skin while allowing treatment parameters to be customized according to the patient’s needs.

Fractional CO2 resurfacing works differently from many lighter aesthetic lasers. Instead of treating the entire surface uniformly, fractional technology creates microscopic treatment zones while leaving areas of surrounding skin untreated.

This controlled process activates the skin’s natural healing response and supports new collagen formation as the skin renews. Fractional treatment can also allow for faster healing than fully ablative resurfacing, although recovery still varies significantly depending on treatment depth and intensity.

The result? 

Smoother texture. Softer lines. More even-looking skin. And a refreshed complexion that continues to improve as your skin remodels.
What Can CO2 Laser Resurfacing Treat?

One reason CO2 resurfacing remains such an important aesthetic treatment is its ability to address multiple skin concerns during the same treatment plan.

Your personalized ZenPro CO2 treatment may be recommended to improve the appearance of: 

Acne and Surgical Scars

Fractional laser resurfacing can be an excellent option for improving certain types of textural acne and surgical scarring by resurfacing irregular skin and encouraging collagen remodeling.

Uneven Skin Texture

Improve rough, crepey, or irregular skin for a smoother and more refined appearance.

Sun-Damaged Skin

Years of South Florida sun exposure can contribute to visible discoloration, roughness, and premature aging. CO2 resurfacing can help improve the overall appearance of photodamaged skin.

Enlarged Pores

Resurfacing and collagen remodeling may help reduce the visible appearance of enlarged pores and create a smoother-looking complexion.

Dull, Aging Skin

For patients who want more significant correction than a light facial or maintenance laser can provide, CO2 resurfacing can create a more comprehensive skin renewal.

Mild Skin Laxity

Collagen remodeling associated with laser resurfacing can help improve the appearance and quality of mildly lax or crepey skin, although laser resurfacing is not a replacement for surgical lifting when significant laxity is present.

Infographic for ZenPro CO2 Laser at SP Aesthetics showing common treatment concerns including fine lines, deep wrinkles, acne scars, uneven skin texture, sun damage, enlarged pores, scar revision, skin rejuvenation, and pigmentation concerns.

What Areas Can Be Treated With CO2 Laser?

Fractional CO2 resurfacing is most commonly associated with facial rejuvenation, but treatment areas can vary depending on the patient’s skin, concerns, and treatment plan.

Areas we may evaluate include:

  • Face
  • Around the mouth
  • Cheeks
  • Forehead
  • Jawline
  • Neck
  • Décolleté/chest
  • Selected scars or targeted areas 

Fractional CO2 resurfacing is most commonly associated with facial rejuvenation, but treatment areas can vary depending on the patient’s skin, concerns, and treatment plan.

Some areas of the body heal differently than facial skin, so not every patient or treatment area will be appropriate for the same level of CO2 resurfacing. A consultation is required to determine whether ZenPro CO2 is appropriate for the area you would like treated.

How Much Downtime Is There After CO2 Laser Resurfacing?
Downtime depends heavily on the intensity and depth of your treatment.
When Will I See My CO2 Laser Results?

CO2 laser resurfacing is not the same as a no-downtime facial or light maintenance laser.

Following ablative resurfacing, patients should expect a healing period that can include:

  • Redness
  • Swelling
  • Warmth or sensitivity
  • Peeling or flaking
  • Dryness
  • Temporary changes in skin appearance as the area heals

Recovery from CO2 resurfacing generally takes up to two weeks, although actual healing varies by procedure and patient.

More conservative fractional treatments may have a different recovery experience than aggressive resurfacing. During your consultation at SP Aesthetics, we will discuss your expected downtime before deciding how aggressively to treat your skin.

CO2 resurfacing is a process rather than an overnight transformation.

Once the initial healing process is complete, patients may begin noticing:

  • Smoother-looking skin
  • Improved texture
  • A more refreshed complexion
  • Softening of visible lines
  • Improvement in certain scars
  • More even-looking skin

Your skin may continue to evolve as collagen remodeling occurs following treatment.

The degree of improvement varies based on your starting skin condition, treatment intensity, treatment area, age, healing response, sun exposure, skincare routine, and treatment goals.

For some patients, a single more intensive resurfacing treatment may provide significant improvement. Other patients may benefit from a staged treatment plan or a combination of procedures. 

Who Is a Good Candidate for Fractional CO2 Laser?

You may be a candidate if you are bothered by:

  • Acne scars
  • Fine lines or wrinkles
  • Rough or uneven texture
  • Visible sun damage
  • Enlarged-looking pores
  • Certain scars
  • Crepey or aging skin
  • Skin that needs more correction than a light resurfacing treatment can provide

However, CO2 resurfacing is not appropriate for everyone.

Factors such as active skin conditions, recent sun exposure, certain medications, history of abnormal scarring, history of cold sores, skin tone, and pigmentation risk may influence whether CO2 laser resurfacing is recommended.

This is why SP Aesthetics requires an individualized assessment rather than simply booking every patient for the same laser treatment. 

CO2 laser resurfacing device displayed inside SP Aesthetics in Wellington, FL.
Why Choose SP Aesthetics for CO2 Laser Resurfacing in Wellington?

Who is evaluating your skin and building your treatment plan matters just as much.

Our approach is centered around one principle: Enchance. Don’t overdo. 

We take the time to understand your goals, evaluate your skin, and develop a customized treatment plan rather than recommending the same procedure to every patient.

SP Aesthetics already offers a comprehensive collection of advanced aesthetic treatments including Sciton MOXI, Sciton BBL, microneedling, PRF, medical-grade facials, injectables, skincare, and advanced skin analysis.

Our goal is to determine what your skin actually needs.

Before and After Gallery
Frequently Asked Questions About CO2 Laser Resurfacing
Is CO2 laser resurfacing worth it?
For properly selected patients seeking meaningful improvement in wrinkles, texture, photodamage, or certain scars, CO2 resurfacing can provide a level of correction that lighter resurfacing procedures may not be able to achieve. The tradeoff is generally more recovery than a non-ablative laser treatment.
Fractional laser resurfacing is frequently used as part of treatment plans for certain acne scars. The best approach depends on whether scars are rolling, boxcar, ice-pick, tethered, pigmented, or combined with other scar types, so an evaluation is important. Cleveland Clinic includes laser resurfacing among options used to improve acne scarring.
CO2 laser resurfacing is commonly used to improve the appearance of facial fine lines and wrinkles by resurfacing damaged skin and stimulating the healing and collagen-remodeling process.
Recovery varies according to treatment intensity. More aggressive CO2 resurfacing can require approximately one to two weeks of initial recovery, while fractional protocols may differ. Your expected downtime will be discussed before treatment.
There is no universal number. Some patients choose a single more intensive resurfacing treatment, while others benefit from more conservative treatments or a staged plan. Your recommendation will depend on your skin, concerns, treatment intensity, and desired results.
Skin tone and history of pigmentation must be carefully considered with ablative laser resurfacing. Darker skin tones can carry an increased risk of post-treatment pigmentation changes. A consultation is necessary before recommending CO2 resurfacing.
Your exact instructions will depend on your treatment. In general, sun exposure and irritating skincare products need to be avoided during healing, and diligent sun protection is essential. Your SP Aesthetics provider will give you detailed post-treatment instructions.

Curious what you would look like? Find out in 60 Seconds?

Our AI-powered preview tool lets you see potential treatment results on your own face and body - before you ever step into our office. No commitment, no guessing.

AI-powered photo capture interface for aesthetic treatment previews, featuring instructions for optimal angles and lighting on a smartphone.
Experience Advanced CO2 Laser Resurfacing in Wellington, Florida

If you’re ready to improve stubborn texture, acne scarring, visible signs of aging, or years of accumulated sun damage, ZenPro CO2 Laser Resurfacing at SP Aesthetics may be the skin reset you’ve been searching for.

Our team will help you understand your options, choose the appropriate treatment intensity, and create a personalized plan designed around your skin—not a trend.

SP Aesthetics welcomes patients from Wellington, Royal Palm Beach, Loxahatchee, Lake Worth, Greenacres, West Palm Beach, and surrounding Palm Beach County communities. 

Together, we can work to achieve the best YOU.
SP Aesthetics Upneeq open house event for brighter-looking eyes and complimentary consultations.
Santeena Fine, APRN, FNP-C, nurse practitioner at SP Aesthetics, wearing teal scrubs, smiling against a gray background, representing expertise in aesthetic treatments and patient care.

Santeena Fine, APRN, FNP-C

Nurse Practitioner

Santeena Fine, APRN, FNP-C, has joined SP Aesthetics as our newest injector. She earned her Master’s degree with high honors from South University. With over nine years of experience as an RN, she brings a deep understanding of patient care, safety, and precision to the world of aesthetics. Known for her artistry and attention to detail, Santeena specializes in delivering natural-looking, confidence-boosting results through treatments like Botox, dermal fillers, and other non-surgical enhancements. She stays at the forefront of aesthetic innovations to provide her clients with the best possible care. Outside of work, Santeena enjoys traveling with her husband, finding beautiful running trails, trying new restaurants, and savoring a great glass of wine. Above all, family is everything to Santeena.